Setting Up HTTPS
By default, the CallReplay web interface can be accessed via plain HTTP, however SSL can be enabled from the System > HTTPS menu. This will allow users to log in to CallReplay securely over a HTTPS connection. The administrator can generate a new certificate or use an existing one.
In System > HTTPS, under the Connection Type dropdown list, switch to Secure:
System > HTTPS
The Certificate Configurator window should appear. Here you can generate a self-signed certificate, or import an already existing certificate. You can also change the existing certificate and start using a different one.
Generate Self-Signed Certificate
To generate a new certificate, make sure the Generate Self-Signed Certificate radio box is checked and click Finish. A confirmation to restart the CallReplay service will appear.
Click Yes to restart the CallReplay service and enable the new settings.
To check the new connection type, open a web browser and go to https://IP_OF_RECORDER/. If the certificate is not signed by a CA authority, you will most likely need to explicitely tell the browser to accept the public certificate:
Confirm the security exception. Next, the CallReplay login interface should appear. The System > HTTPS window should show information about the currently used certificate:
You may want to use an already existing certificate, in which case in the Certificate Configurator window make sure the Import Certificate radio box is checked:
Click Next. In the window that appears, browse to the location of the certificate file (pfx/p12) that you want to import.
Click Next. A window showing available certificates will appear. Select the desired one and click Next.
Restart the CallReplay service to enable the new settings.
Created 2 years ago
Last Updated 2 years ago